The N8XJK Marine Booster is a 12volt DC Booster Regulator. It is designed to boost your 12volt DC power up to 15volts DC even with the supply voltage drops as low as 9volt. It is a sealed water tight unit and is suitable for boating or outdoor conditions. Although it can be used indoors as well.
Options are available. You can have a Remote Switch with Cable that you can place where you like, or a Water Tight Switch can be mounted on the Front Panel. The Marine Booster can be customized so that it will restart automatically after Low Battery Cut-off activation.
Our Remote/ Meter Panel can be used with this Marine Booster.
The N8XJK Marine Booster is a 12volt DC Booster Regulator. It is designed to boost your 12volt DC power up to 15volts DC even with the supply voltage drops as low as 9volt. It is a sealed water tight unit and is suitable for boating or outdoor conditions. Although it can be used indoors as well.
Options are available. You can have a Remote Switch with Cable that you can place where you like, or a Water Tight Switch can be mounted on the Front Panel. The Marine Booster can be customized so that it will restart automatically after Low Battery Cut-off activation.
Our Remote/ Meter Panel can be used with this Marine Booster.
The dimentions are 7" wide x 3.5" deep x 2.25" high.
The N8XJK Marine Booster has the following features:
A remote terminal strip that allows for monitoring of Input voltage and output voltage, remote enabling, and for extra Low Battery and Enable LEDS. This unit comes with a remote switch for operation. Please contact us for help or for more information.
Your Marine Booster will allow you to:
Maintain any output voltage greater than battery voltage up to 15 volts!
Mount the unit is a wet environment due to it sealed enclosure. Keep in mind that it is water tight and not water proof.
Keep Battery voltage present at the output with the supply turned off! 1
Boost voltages at 25 Amps load.
Protect your battery with a low voltage lockout feature. 2
1 Battery voltage less one Schottky diode voltage drop.
2 Low Battery voltages set to 9, 10, or 11 volts. Note: The unit does not disconnect your load from the battery. Disconnecting the battery is the user's responsibility.
