This unit has the same basic functions as our original unit, but with following added features:
4. The New Remote Terminal Strip. This allows for remote control and monitoring with a pin type terminal strip. With the terminal strip you can externally Enable the booster and monitor input and output voltages. You can also add external low battery and enable LED's. The terminal strip also has a 12volt source voltage for powering and external circuit. Call us for more info.
NOTE: YOU MUST GET THROUGH ALL PAGES AND HIT THE "CONFIRM" BUTTON to have your order placed!
1st off, Dan Kemppainnen(N8XJK)is the genius and orginal designer of the 12volt booster regulator circuit. Also, TG Electronics works with and is backed by Dan Kemppainen to make sure you have the best possible customer service possible.
A large amount electronic equipment on the market today do not tolerate low voltage conditions. This Boost Regulator was designed to supply a constant voltage to the equipment regardless of the input voltage. It's simply AMAZING!!!
The Boost Regulator is a switching power supply that regulates the output and boosts the voltage to your equipment. The increased voltage prevents distortion commonly seen on modern mobile radios. It also maintains transmit power and allows longer operation from a battery.
The Boost Regulator was designed so the boosted voltage is added to the battery voltage. This means only the difference between the input and output voltage is converted by the internal Switch Mode Power Supply. With this configuration, the losses only apply to the Boosted Voltage. This means that real world efficiency is above 90%!
The unique design of the Boost Regulator allows input voltage to be present at the output of the supply even when the supply is disabled or is in stand by mode. No transfer relays are required. The Boost Regulator does not boost voltage when battery voltage is above the regulator set point. If there is enough input voltage, it doesn't do anything! But as soon as you need it, it's there!
Your new Boost Regulator will allow you to maintain any output voltage greater than battery voltage, up to 15 volts. The Boost function can be enabled manually via a front panel switch, or automatically via the RF detect input attached to the antenna lead of the transmitter. This allows the Boost Regulator to supply boosted voltage only when transmitting.
In bypass, the input voltage is passed to the attached radio with no regulation. In this mode, the filter stage of the supply is still in circuit and will act to filter RFI from the battery voltage to the radio. This can help to reduce noise induced into the power circuit from other attached electronic devices such as Chargers, Alternators, Ignition systems. If RFI is a concern, this unit is for you!!
We can custom build this unit the way you need it. The N8XJK Boost Regulator comes with 6' lengths of cable and optional Anderson Powerpole connectors. Call Tim Gerdeen of TG Electronics at (906) 370-5031 or email timig@email.com for custom orders or for more details.
FEATURES:
Comes with a Full One Year Warranty.
Maintain any output voltage up to 15 volts, even with an input as low as 9 volts!!!
Eliminate RFI!!!! Enable the boost fulltime or with the RF detect Input with your radios microphone only when transmitting!!
Input voltage is present at the output with the supply turned off!
Boost voltages at 25 Amps load.
Protect your battery with a low voltage lockout feature.
Over 90% Efficient!! Battery voltage less one Schottky diode voltage drop.
Low Battery cut-off set to 9, 10, or 11 volts.
Comes with a 30amp internal fuse.
SPECIFICATIONS:
- Specifications are typical and may vary. Voltage:
Input: 9 to 15 Volts DC.
