Loading... Please wait...

Our Newsletter


Automatic Battery Disconnect ABD-1

  • Image 1
Price:
$79.95
SKU:
15
Quantity:


Product Description

Introducing TG Electronic's Automatic Battery Disconnect ABD-1. The ABD is a great device for connecting and disconnecting to your battery or power source. The ABD uses a Power Relay so that the connection can be made remotely. It is designed to be used with any of our N8XJK Boost Regulators, but can be used alone.

NOTE: When ordering, YOU MUST GET THROUGH ALL PAGES AND HIT THE "CONFIRM" BUTTON to have your order placed!

Introducing TG Electronic's Automatic Battery Disconnect ABD-1. The ABD is a great device for connecting and disconnecting to your battery or power source. The ABD uses a Power Relay so that the connection can be made remotely. It is designed to be used with any of our N8XJK Boost Regulators, but can be used alone.

The ABD uses a Relay Contact Closure to connect and disconnect your battery.

The Input to the ABD is connected to your battery or power source, and the Output is connected to your boosters input or other load. The single wire connects to the Vout terminal inside your booster, or can be connected directly to your battery with a switch for control of the ABD.

To operate, 1st the Red Button is depressed activating the relay, and in turn, powers your Booster. As long as your booster is enabled, the relay will keep the connection to the battery. When the battery runs down, the voltage will drop and the relay will disconnect your battery. The small red wire carries the power and control of the relay coil. The Turn-pot or Potentiometer on the front panel can be adjusted for the optimum release for just when the booster quits boosting, or for sometime after. The ABD can be adjusted to disconnect when the battery drains down to a desired voltage. Ask us about custom options.

 

Specifications:

 

Cable: 3' input and Output, 10 guage (Anderson PowerPole connectors are avaiable)

Size: 5.75" wide x 2.25" tall x 3.25" deep

 

Contact Resistance......................50 milliohms initially.

Contact rating..........................40Amps @ 120Volts AC.

Coil Resistance.........................70 ohms

Coil current (average)..................0.2Amps @ 12volts

Minimum coil activation voltage.........7.5volts DC

Relay Dielectric strength...............1500Vms

Contact material................Silver Cadmium Oxide, gold flashed

 

Warranty:

TG Electronics warranties this device against defects in parts and workmanship for the period of 1 Year from the date of purchase. Beyond the warranty period if you have any problems with your supply, Please contact us immediately. We are fully committed to supporting you in your purchase of our products. We reserve the right to extend warranty period if we feel it is appropriate. Please be advised that any alteration or improper installation or use of the unit will void the warranty. We are not responsible for the consequences of misuse or improper operation.

 

For questions call Tim @ 906 370-5031, or email timig@email.com


Find Similar Products by Category


Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!


Add to Wish List

Click the button below to add the Automatic Battery Disconnect ABD-1 to your wish list.

You Recently Viewed...